A highly explicit electrochemical biosensor for catechol detection in real samples based on copper-polypyrrole.

Catechol is a pollutant that can lead to serious health issues. Identification in aquatic environments is difficult. A highly specific, selective, and sensitive electrochemical biosensor based on a copper-polypyrrole composite and a glassy carbon electrode has been created for catechol detection. The novelty of this newly developed biosensor was tested using electrochemical techniques. The charge and mass transfer functions and partially reversible oxidation kinetics of catechol on the redesigned electrode surface were examined using electrochemical impedance spectroscopy and cyclic voltammetry scan rates. Using cyclic voltammetry, chronoamperometry, and differential pulse voltammetry, the characteristics of sensitivity (8.5699 µA cm-2), LOD (1.52 × 10-7 µM), LOQ (3.52 × 10-5 µM), linear range (0.02-2500 µM), specificity, interference, and real sample detection were investigated. The morphological, structural, and bonding characteristics were investigated using XRD, Raman, FTIR, and SEM. Using an oxidation-reduction technique, a suitable biosensor material was produced. In the presence of interfering compounds, it was shown that it was selective for catechol, like an enzyme.

Simultaneous Quantification of Opioids in Blood and Urine by Gas Chromatography-Mass Spectrometer with Modified Dispersive Solid-Phase Extraction Technique.

Common methodologies such as liquid-liquid extraction and solid-phase extraction are applied for the extraction of opioids from biological specimens i.e., blood and urine. Techniques including LC-MS/LC-MSMS, GC-MS, etc. are used for qualitative or quantitative determination of opioids. The goal of the present work is to design a green, economic, rugged, and simple extraction technique for famous opioids in human blood and urine and their simultaneous quantification by GC-MS equipped with an inert plus electron impact (EI) ionization source at SIM mode to produce reproducible and efficient results. Morphine, codeine, 6-acetylmorphine, nalbuphine, tramadol and dextromethorphan were selected as target opioids. Anhydrous Epsom salt was applied for dSPE of opioids from blood and urine into acetonitrile extraction solvent with the addition of sodium phosphate buffer (pH 6) and n-hexane was added to remove non-polar interfering species from samples. BSTFA was used as a derivatizing agent for GC-MS. Following method validation, the LOD/LLOQ and ULOQ were determined for morphine, codeine, nal-buphine, tramadol, and dextromethorphan at 10 ng/mL and 1500 ng/mL, respectively, while the LOD/LLOQ and ULOQ were determined for 6-acetylmorphine at 5 ng/mL and 150 ng/mL, respectively. This method was applied to real blood and urine samples of opioid abusers and the results were found to be reproducible with true quantification.

Comparative Evaluation of Various Extraction Techniques for Secondary Metabolites from Bombax ceiba L. Flowering Plants along with In Vitro Anti-Diabetic Performance.

Bombax ceiba L. (Family: Malvaceae) was rightly called the "silent doctor" in the past as every part of it had medicinal value. For centuries, humans have used this plant according to the traditional medicinal systems of China, Ayurveda, and tribal communities. Recently, with an emerging interest in herbals, attention has been paid to scientifically validating medicinal claims for the treatment of diabetes using secondary metabolites of B. ceiba L. flowers. In the present study, specific secondary metabolites from the flowers of B. ceiba L. were isolated in good yield using the solvent extraction methodology, and their in vitro anti-diabetic efficacy was examined. Extraction efficiency of each solvent for secondary metabolites was found in following order: water > ethanol> methanol > chloroform > petroleum ether. Quantitative analysis of secondary metabolites showed 120.33 ± 2.33 mg/gm polyphenols, 60.77 ± 1.02 mg/g flavonoids, 60.26 ± 1.20 mg/g glycosaponins, 0.167 ± 0.02 mg/g polysaccharides for water extract; 91.00 ± 1.00 mg/g polyphenols, 9.22 ± 1.02 mg/g flavonoids, 43.90 ± 0.30 mg/g glycosaponins, 0.090 ± 0.03 mg/g poly saccharides for ethanol extract; 52.00 ± 2.64 mg/g polyphenols, 35.22 ± 0.38 mg/g flavonoids, 72.26 ± 1.05 mg/g glycosaponins, 0.147 ± 0.01 mg/g polysaccharides for methanol extract; 11.33 ± 0.58 mg/g polyphenols, 23.66 ± 1.76 mg/g flavonoids, 32.8 ± 0.75 mg/g glycosaponins, 0.013 ± 0.02 mg/g polysaccharides for chloroform extract; and 3.33 ± 1.53 mg/g polyphenols, 1.89 ± 1.39 mg/g flavonoids, 21.67 ± 1.24 mg/g glycosaponins, 0.005 ± 0.01 mg/g polysaccharides for petroleum ether extract. Glucose uptake by yeast cells increased 70.38 ± 2.17% by water extract.

Fabrication of Guided Tissue Regeneration Membrane Using Lignin-Mediated ZnO Nanoparticles in Biopolymer Matrix for Antimicrobial Activity.

Periodontal disease is a common complication, and conventional periodontal surgery can lead to severe bleeding. Different membranes have been used for periodontal treatment with limitations, such as improper biodegradation, poor mechanical property, and no effective hemostatic property. Guided tissue regeneration (GTR) membranes favoring periodontal regeneration were prepared to overcome these shortcomings. The mucilage of the chia seed was extracted and utilized to prepare the guided tissue regeneration (GTR) membrane. Lignin having antibacterial properties was used to synthesize lignin-mediated ZnO nanoparticles (∼Lignin@ZnO) followed by characterization with analytical techniques like Fourier-transform infrared spectroscopy (FTIR), UV-visible spectroscopy, and scanning electron microscope (SEM). To fabricate the GTR membrane, extracted mucilage, Lignin@ZnO, and polyvinyl alcohol (PVA) were mixed in different ratios to obtain a thin film. The fabricated GTR membrane was evaluated using a dynamic fatigue analyzer for mechanical properties. Appropriate degradation rates were approved by degradability analysis in water for different intervals of time. The fabricated GTR membrane showed excellent antibacterial properties against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacterial species.

Controlled preparation of grafted starch modified with Ni nanoparticles for biodegradable polymer nanocomposites and its application in food packaging.

Grafting of starch with methyl methacrylate was carried out using a free radical mechanism. Free radicals were generated by the thermal disintegration of potassium persulphate at the temperature of 60°C. A variety of experimental methods were investigated to check the effect of different parameters such as (temperature, amount of starch, quantity of monomer) for efficient grafting. The optimum temperature found for good grafting was 60°C. The initial amount of starch was taken as 0.75 g. Keeping the amount of starch constant, the quantity of monomer was reduced gradually from 10 to 2 ml in portions of 5 and 3 ml. The controlled biodegradability of the grafted product was obtained by using a 3 ml monomer in 0.75 g starch. This grafted polymer showed 31.45% biodegradability in 60 days. The nanocomposite of starch grafted methyl methacrylate was prepared by incorporating 0.02 g Ni nanoparticles in the reaction flask 15 min before the completion of reaction time. The starch grafted polymer and nanocomposite of this were fully characterized by SEM, FTIR, TGA, and DSC techniques. The soil burial method was applied to estimate the biodegradability of samples. The polymer containing Ni nanoparticles was less biodegradable than without nanoparticles. Such polymers can be efficiently used as packaging material for food items. RESEARCH HIGHLIGHTS: Through a free radical method, methyl methacrylate was grafted onto the backbone of starch in this study. During the process, nickel nanoparticles were added to achieve the nickel nanocomposite of the starch grafted polymer. The breakdown of starch grafted polymer after 60 days in a soil burial experiment was 31.45%, whereas the degradation of nanocomposites was 20.07%. Our synthesized nanocomposite polymers can be effectively employed as packaging material for food items.

Antiproliferative and Pro-Apoptotic Effects of Thiazolo[3,2-b][1,2,4]triazoles in Breast and Cervical Cancer Cells.

BACKGROUND AND OBJECTIVES: Cancer is one of the leading causes of death in the world affecting millions of people. The commercially available anticancer drugs lack the selectivity and show several undue side effects during the biologically targeted therapy, thus calling for the exploration of wider chemical space to furnish new structural leads with promising anticancer potential. In this endeavor, we synthesized a series of coumarinyl thiazolotriazoles with diverse functional group tolerance and will be tested for their anticancer properties against cancer cell lines (HeLa and MCF-7) and a normal cell line (BHK-21). MATERIALS AND METHODS: To overcome such complications, in the current study, we evaluated the cytotoxic effects of coumarinyl thiazolotriazole hybrids on human breast adenocarcinoma (MCF-7), cervical adenocarcinoma (HeLa) cells and normal cells i.e., Baby Hamster Kidney cells (BHK-21) using MTT (dimethyl-2-thiazolyl- 2,5-diphenyl-2H-tetrazolium bromide) assay. DNA binding studies of compound 6c was performed on Herring- Sperm DNA (HS-DNA) and docking studies were also carried out. The mechanistic studies were performed on potent compounds by fluorescent microscopic studies, release of Lactate Dehydrogenase (LDH) and mitochondrial membrane potential, activation of caspase-9 and -3 and flow cytometric analysis. RESULTS: As revealed by MTT assay, compounds 6m and 6c were identified as the most potent derivatives among the tested series with IC50 values of 5.64 and 29.1 µM against HeLa and MCF cells, respectively as compared to cisplatin which gave IC50 values of 11.3 and 6.20 µM, respectively. DNA binding studies of compound 6c showed the binding of compound in DNA with Gibbs free energy of ‒17 KJ/mol and docking studies validated the DNA binding studies. Fluorescent microscopic studies using 4',6-diamidino-2-phenylindole (DAPI) and Propidium Iodide (PI) staining confirmed the occurrence of apoptosis in HeLa cells treated with the most active compound 6m. Moreover, compounds 6m and 6c also triggered the release of Lactate Dehydrogenase (LDH) in treated HeLa and MCF-7 cells while a luminescence assay displayed a remarkable increase in the activity of caspase-9 and -3. Moreover, flow cytometric results revealed that compound 6m caused G0 /G1 arrest in the treated HeLa cells. CONCLUSION: Our results suggested that the compound possesses chemotherapeutic properties against breast cancer and cervical adenocarcinoma cells, thus warranting further research to test the anticancer efficacy of this compound at clinical level.

Modified QuEChERS extraction method followed by simultaneous quantitation of nine multi-class pesticides in human blood and urine by using GC-MS.

Organophosphate, carbamate and pyrethroid pesticides are the most common insecticides used worldwide. They may cause chronic poisoning in farmers and acute poisoning in homicidal or suicidal cases. The determination of trace levels of these pesticides in human blood and urine is very challenging. This study focuses on a simultaneous quantitation method that was developed and validated for multi-class nine pesticides belonging to organophosphate, carbamate and pyrethroid classes in human blood and urine. Target pesticides were extracted from blood and urine using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction method. Capillary column DB-35 ms (15 m × 0.25 mm, 0.25 µm) was used for chromatography with a 0.079 ml/min flow rate of carrier gas at constant pressure mode. Quantitation of sulfotep, phorate, carbofuran, chlorpyriphos, profenophos, triazophos, pyriproxyfen, lambda-cyhalothrin and permethrin was performed by mass spectrometer equipped with electron impact ionization source using selected ion monitoring (SIM) mode. The lower and upper limits of quantitation for all nine pesticides were 0.01 mg/L and 2.0 mg/dL respectively. The proposed method was proved to be simple, fast, sensitive, and robust. It has been applied to the analysis of 9 pesticides samples.

One-pot synthesis of redox-responsive polymers-coated mesoporous silica nanoparticles and their controlled drug release.

A versatile one-pot strategy for the preparation of reversibly cross-linked polymer-coated mesoporous silica nanoparticles (MSNs) via surface reversible addition-fragmentation chain transfer (RAFT) polymerization is presented for the first time in this paper. The less reactive monomer oligo(ethylene glycol) acrylate (OEGA) and the more reactive cross-linker N,N'-cystaminebismethacrylamide (CBMA) are chosen to be copolymerized on the external surfaces of RAFT agent-functionalized MSNs to form the cross-linked polymer shells. Owing to the reversible cleavage and restoration of disulfide bonds via reduction/oxidation reactions, the polymer shells can control the on/off switching of the nanopores and regulate the drug loading and release. The redox-responsive release of doxorubicin (DOX) from this drug carrier is realized. The protein adsorption, in vitro cytotoxicity assays, and endocytosis studies demonstrate that this biocompatible vehicle is a potential candidate for delivering drugs. It is expected that this versatile grafting strategy may help fabricate satisfying MSN-based drug delivery systems for clinical application.